UPS & nbsp; (also known as UPS) is a device that provides power to maintain the operation of other equipment when power is lost for a period of time. concentration. In addition to the main function used to save backup power, the unit is also used to automatically stabilize voltage, moderate frequency, prevent impulse, filter direction and prevent lightning propagation. However, how to use UPS efficiently and safely? Is a question that new users or even those who have used it for a long time are not sure to fully grasp.
Today, ADG sends you to read the article & nbsp; How to use UPS UPS , providing the most basic and useful information to help customers use the equipment. save electricity effectively in your office or home, improving product longevity.
Notes on Using the UPS UPS
I. UPS environment
– & nbsp; UPS UPS & nbsp; must be placed in a well-ventilated, direct sunlight. Avoid places with excessive humidity and temperature, avoid chemicals and dust.
– The unit should not be tilted. The UPS unit should not be sealed, air in the bottom and the fan should be left on the back to ensure best ventilation, this is & nbsp; how to use the UPS & nbsp; Effective.
– Do not put papers, supplies on the UPS, the distance from other items to the UPS must be about 45cm enough for the unit to drain heat.
- Turning on the UPS
- Turning the UPS on according to power consumption
– & nbsp; UPS UPS & nbsp; it is safe that after being connected to a power source, whether or not the UPS UPS to work on by-pass mode is thanks to the software. WinPower.
For models from 6KVA and above, the by-pass is pre-installed, so & nbsp; users often forget to turn on the UPS and when there is a power problem the device will has been interrupted suddenly and will not match & nbsp; UPS UPS usage.
– Press and hold the “ Power on ” button for 3 seconds to turn on the UPS.
– Once activated, & nbsp; storage UPS power & nbsp; will initiate the self-test with the front panel indicator lights (1-6 indicators) turned on and then turning off one after another as required. submit from bottom up.
A few seconds after the converter light is turned on, the UPS is operating on utility power mode.
If the power supply is abnormal, the UPS UPS will operate in battery mode.
II. Turn on the UPS UPS in battery mode (not connected to utility power)
– No power supply, press and hold the “ Power on ” button for 3 seconds to turn on the UPS
HOW TO USE THE UPS SAFETY AND EFFICIENCY
UPS (also known as UPS) is a device that provides power to maintain the operation of other equipment when the power is lost for a certain period of time. In addition to the main function used to save backup power, the unit is also used to automatically stabilize voltage, moderate frequency, prevent impulse, filter direction and prevent lightning propagation. However, how to use UPS efficiently and safely? Is a question that new users or even those who have used it for a long time are not sure to fully grasp.
UPS UPS brand Riello
Today, ADG sends you to read the article How to use UPS UPS, providing the most basic and useful information to help customers use electrical storage devices in your office or home effectively, improve product lifespan.
Cautions when using the UPS UPS
I. UPS Location
- UPS UPS must be located in a place away from direct sunlight, well-ventilated. Avoid places with excessive humidity and temperature, avoid chemical environment and dust.
- Do not place the unit tilted. The UPS unit should not be sealed, air in the bottom, and the back fan should be left out to ensure best ventilation, this is an effective way of using the UPS.
- Do not put papers and supplies on the UPS, the distance from other items to the UPS must be about 45cm enough for the unit to drain heat.
Turn on UPS
Turn the UPS on according to the power usage mode
- UPS UPS is safe after being connected to the power source, setting the UPS UPS to work in mode by-pass or not is thanks to WinPower software.
For models from 6KVA and above, the by-pass mode is pre-installed, so users often forget to turn on the UPS and when there is a power failure, the device will be cut off suddenly. and will not be correct with the use of the UPS UPS.
- Press and hold the “Power on” button for 03 seconds to turn on the UPS UPS.
Once activated, the UPS unit will initiate a self-test with the front panel indicator lights (indicators 1-6) turned on and then turning off one after another following the procedure. bottom up.
A few seconds after the converter light is turned on, the UPS is operating on utility power mode.
If the power supply is abnormal, the UPS UPS will operate on battery mode.
II. Turn on the UPS the UPS in battery mode (not connected to utility power)
- Without power supply, press and hold the “Power on” button for 03 seconds to turn on the UPS
- During the power-on, the UPS functions as if it were connected to utility power, except that the power indicator light does not come on and the battery indicator light is on.
III. How to use the UPS UPS: Turn off the UPS
Turn off the UPS unit that is connected to utility power
- Press and hold the “Power off” button for 03 seconds to turn off the UPS UPS and the converter is also turned off immediately.
- When being turned off, the UPS will start to self-test, all the indicators 01 – 06 will light up and then turn off slowly one by one in order from the bottom up.
- After completing the above steps to turn off the UPS UPS, the UPS output socket still has current. To disconnect the UPS output, simply disconnect the power supply and the UPS will begin to manually test the UPS UPS instructions.
Finally there are no indicator lights lit on the front and the UPS output sockets are no longer on voltage.
Turn off the UPS unit in operation in battery mode.
- Press and hold the “Power off” button for 03 seconds to turn off the UPS
- When being turned off, the UPS begins to self-test and all the lights from 01-06 will light up and then gradually turn off each one in order from the bottom up.
Finally there are no lights on the front of the UPS UPS and the UPS output socket is no longer on voltage.
IV. Discharge and recharge the battery
- How to use the UPS in an environment with an air conditioner installed (20 degrees C – 25 degrees C), about 06 months should let the UPS operate in battery mode once. In places with no air conditioning (> 30 degrees C) for about 03 months, the UPS should operate in battery mode once for the UPS to self-discharge until about 50% of the capacity of the battery. regulations.
To do this by unplugging the UPS electrical outlet from the utility utility power. Then plug the power back into the UPS charger to recharge with a recharge time of at least 08 hours.
- The manufacturer always recommends that UPS being used as well as in storage must always comply with the above maintenance procedures to not affect the life of the battery.
V. Battery Protection
– When the utility power goes out, the UPS should not be charged for too long (will discharge the battery), especially for too small loads (& lt; 15% of UPS capacity) Battery discharge too long will be one of the causes of damage to your battery, which is the 2nd failure rate after the effects of improper temperature & nbsp; how to use a UPS UPS .
– If & nbsp; UPS UPS & nbsp; in stock or not in use for 3 months or more, the UPS must be powered on to operate the UPS to self-charge with a recharge time of at least 08 hours.
VI. Download using
– Use correct load type and correct UPS capacity. Ideally you should use load ≤ 70% capacity of UPS.
– The load will only be used after the UPS has been operating properly.
UPS UPSSALS ARE AVAILABLE IN VIETNAM
ADG & nbsp; is the importer and distributor of UPS product lines of famous brands in the world such as & nbsp; RIELLO, EATON, … .. & nbsp; With 100% genuine standard goods, imported complete unit, manufacturer’s warranty and very competitive price.
We are a unit specialized in providing telecommunication products and equipment with many years of experience and reputation in Hanoi. You will be completely assured of the product quality and the service attitude of the staff. For inquiries about products & nbsp; UPS UPS & nbsp; or purchase information, please contact us directly to receive genuine, high quality products at the price cheapest in the market.
Leave a Reply